Installation
Xerox Common Access Card
Common Access Card Installation Guide
14
7. Load the DC root and intermediate certificates and the OCSP root and intermediate certificates.
a. Select Security then Trusted
Certificate Authorities page.
b. At the Trusted Certificates
Authorities screen, select Add.
c. Browse to the Root certificate of
your server and add your
certificates one at a time.
d. An Updated Successfully screen
is displayed if your certificates
are valid and have been updated
to the printer successfully.
e. Select OK.
8. Check the Proxy Server details are configured.
a. Select the Properties tab, then
Connectivity, Protocols and
Proxy Server and enter the
details for your proxy server if
required.
b. Select Apply.
The Common Access Card settings are now configured. You are now ready to install the Common
Access Card hardware using the instructions starting on the next page.
To Next Page
Loading...
