18
Making Copies on the Document Glass
1. Select the desired copy features from the
control panel.
2. Select the number of copies.
• Press the left key to increase the
quantity by 10. Press the right key to
increase the quantity by 1.
• To clear the selected quantity, press the
clear key.
1. Lift the Document Cover.
2. Place the original face down and align it
with the registration guide on the
document glass.
Note: Writing that is very close to the leading
or trailing edge of the original may not copy.
Turning the original around on the document
glass may help.
5. Close the Document Cover.
Note: Leaving the cover open while copying
will affect copy quality and toner
consumption.
6. Press Start to begin copying.
• The number in the display window
returns to 1 and advances as each copy
is made.
To Next Page
Loading...
Need help?
General