35
Clearing the Paper Path
If the Misfeed Indicator blinks and the copier stops, a paper misfeed has
occurred.
Be careful not to damage the Photoreceptor or the Corotron during the
clearance of a misfeed. Also take care not to touch the Fuser.
1. Press the release lever to open the copier.
2. Carefully remove the misfed paper.
Warning: The fusing area is hot. Take care
when removing paper from the fuser area.
3. Lift the fuser lever to remove a misfeed in
the fuser area.
• If the paper rips, be sure to remove all
the pieces of paper.
1. Close the copier by gently pushing down
the upper half.
• Ensure that the misfeed indicator has
gone out.
To Next Page
Loading...
Need help?
General