25
Alternate Paper Tray (XC810/ XC1040/ XC1045)
The alternate paper tray can be used to feed multiple sheets of standard
paper, or it can be used to feed single sheets of special or heavy papers
such as note cards, transparencies, and labels.
The alternate paper tray holds up to 50 sheets of (standard weight) copy
paper ranging in size from 3.5
×5.5" to 8.5×14"/ A6 to 216×356mm.
Predrilled paper: holes toward the front of
the copier.
Letterhead paper: face up with the top
toward the left.
Transparencies: one sheet at a time.
Labels: face up, one sheet at a time.
• Use labels and transparencies specifically
designed for copiers (high temperatures).
1. Lower the alternate paper tray, located on
the right side of the copier.
2. Unfold the paper support extension as
shown.
1. Adjust the guides to the width of the copy
paper.
(continued)
To Next Page
Loading...
