22
Reduction/Enlargement
Preset %
Press the Preset % key to quickly select one
of the 6 preset percentages. The customer
settable percentage (
) has been set at
the factory for 70%. Refer to Customizing
Your Copier for information about changing
the default percentage.
Variable Percentage
Press the Variable Percentage key to
increase or decrease the reduction or
enlargement by 1% increments. You may
select any percentage from 70 – 141%.
Press the % key to display the current
percentage. When a variable percentage is
selected the light above the % key is lit.
Display Window
Preset or variable reduction/enlargement
percentages appear in the Display Window at
the time selections are made. After a few
seconds, the reduction/enlargement percent
is replaced with the number of copies
selected. Press the % key to recall the
current reduction/enlargement ratio.
To Next Page
Loading...
Need help?
General