Xerox XC 800 Series User Manual

28
Customizing Your Copier
Programmable Features
The default settings for various copier features may be changed to suit your
individual copying needs. All of these features remain set until this process
is repeated.
Each of the programmable features, along with its program number and
options are contained in the chart below. The procedure to change the
default settings follows the chart.
Feature Program
Number
Option Number
* Factory Setting
Priority Tray: This feature allows you
to set the default paper tray. At power
on or auto clear the copier will return to
the selected priority paper tray.
(Models XC810, XC1040, XC1045,
XC1250, and XC1255 only.)
0 0 – Main Tray *
1 – Alternate
Paper Tray
2 – Second Tray
Auto Clear Time Out: This feature
allows you to select the time it takes for
the copier to return to the normal copy
mode after a copy cycle is complete.
(All models.)
10 – Off
1 – 30 seconds
2 – 60 seconds *
3 – 90 seconds
4 – 120 seconds
Time Out to Power Save: When
enabled, this feature automatically
reduces power used by the copier if the
copier has not been used for the set
period of time.
(All models.)
20 – Off
1 – 45 seconds
2 – 90 seconds *
3 – 2 minutes
4 – 5 minutes
Time Out to Power Shut-Off: When
enabled, this feature significantly
reduces power used by the copier if the
copier has not been used for the set
period of time.
(All models.)
3 0 – 2 minutes
1 – 5 minutes *
2 – 15 minutes
3 – 30 minutes
4 – 60 minutes
5 – 120 minutes
6 – Off

Xerox XC 800 Series Specifications

General

Brand	Xerox
Model	XC 800 Series
Category	Copier
Language	English