Xerox XC 800 Series User Manual

29
Feature Program
Number
Option Number
* Factory Setting
Default Magnification: This feature
allows you to make copies slightly larger
or smaller than the original, or the same
size.
(All models.)
4 0 – 100% *
1 – 99%
2 – 101%
Default Exposure: This feature allows
you to select the default Exposure
mode.
(All models.)
5 0 – Auto
Exposure *
1 – Text
Manual Document Glass Exposure
Adjustment: The copy exposure range
may be adjusted when the copy image
is consistently too light or too dark.
(All models.)
6 0 – +4 steps light
1 – +3 steps light
2 – +2 steps light
3 – +1 step light
4 – Normal *
5 – +1 step dark
6 – +2 steps dark
7 – +3 steps dark
8 – +4 steps dark
Paper Trail Edge Deletion: The trail
edge deletion can be turned off to
accommodate originals that have print
to the very bottom edge. When Off,
another 4 mm will copy, however the
image quality may deteriorate as it gets
closer to the bottom edge.
(All models.)
70 – On *
1 – Off
Paper Tray Bypass Auto Start: When
enabled, the copier will begin to copy as
soon as paper is fed into the paper tray
bypass.
(Models XC820, XC830, XC865, XC1020,
XC1044, XC1250, and XC1255 only.)
80 – On *
1 – Off
Set Document Feeder Auto Start:
When enabled, the SDF will begin to
copy as soon as paper is placed in the
SDF.
(Models XC865, XC1044, XC1045, and
XC1255 only.)
90 – On *
1 – Off

Xerox XC 800 Series Specifications

General

Brand	Xerox
Model	XC 800 Series
Category	Copier
Language	English