33
Copier Care
Cleaning the Document Glass and Cover
Keeping the document glass clean helps ensure the best possible copies.
Xerox suggests that you clean the document glass at the start of each day
and during the day as needed.
CAUTION: Do not pour or spray water directly onto any part of the copier.
For XC810/ XC820/ XC830/ XC1020/
XC1040/ XC1250 copiers only
1. Slightly dampen a soft lint-free cloth or
paper towel with water.
2. Lift the
document cover.
3. Wipe the surface of the document glass
until it is clean and dry.
4. Wipe the underside of the white document
cover until it is clean and dry.
5. Close the document cover.
For XC865/ XC1044/ XC1045/ XC1255
copiers only
1. Slightly dampen a soft lint-free cloth or
paper towel with water.
2. Lift the
SDF cover.
3. Wipe the surface of the document glass
and the SDF glass until each is clean and
dry.
4. Wipe the underside of the white document
cover and the SDF roller until each is
clean and dry.
5. Close the SDF cover.
To Next Page
Loading...
Need help?
General