3 Physical Structure
Figure 3-1 Physical structure of a server with 12 x 3.5" drives (example)
1
I/O module 1 2 I/O module 2
3 PSU 4 Chassis
5 I/O module 3 6 Supercapacitor holder
7 Air duct
NOTE
The air duct cannot be
installed on a server
configured with built-in drives
or built-in cards.
8 Intrusion sensor
9 Front-drive backplane 10 Left mounting ear plate
11 Front drives 12 Right mounting ear plate
FusionServer 2288H V7 Server
Technical White Paper 3 Physical Structure
Issue 02 (2023-05-25) Copyright © xFusion Digital Technologies Co., Ltd. 5
To Next Page
Loading...
