5.9 Fan Modules
● Supports four fan modules.
● Supports hot swap.
● Supports N+1 redundancy. The server runs properly when one fan fails.
● Supports intelligent fan speed adjustment.
● Fan modules of the same part number (P/N code) must be used in a server.
Figure 5-66 Positions of the fan modules
5.10 LCD
Only the 8 x 2.5" drive pass-through configuration supports the LCD.
Functions
The LCD displays the installation status and running status of server components
and enables users to set the IP address of the iBMC management network port on
the server.
The LCD and the server iBMC form an LCD subsystem. The LCD directly obtains
device information from the iBMC. The LCD subsystem does not store device data.
FusionServer 2288H V7 Server
Technical White Paper 5 Hardware Description
Issue 02 (2023-05-25) Copyright © xFusion Digital Technologies Co., Ltd. 90
To Next Page
Loading...
