xFusion Digital Technologies FusionServer 2288H V7 - 12 X 3.5 Drive Pass-Through Configurations

Drive No. Drive Number
Displayed on the iBMC
WebUI
Drive Number
Identified by the RAID
Controller Card
5 5
5
Note
6 6
6
Note
7 7
7
Note
8 8 -
9 9 -
10 10 -
11 11 -
Note: If the slot is configured with a SAS/SATA drive, the RAID controller card
can manage the drive and allocate a number to the drive.
5.5.1.3 12 x 3.5" Drive Pass-Through Configurations
Drive Configurations
Table 5-17 Drive configurations
Configuratio
n
Front Drive Rear Drive Built-in Drive Drive
Management
Mode
12 x 3.5" drive
pass-through
configuration
1
● Front drive:
12 x 3.5"
– Slots 0
to 11
support
only
SATA
drives.
● I/O module
1: 2 x
2.5"
a
/2 x
3.5"
– Slots 40
to 41
support
only
SATA
drives.
● I/O module
3: 4 x 2.5"
– Slots 44
to 47
support
only
NVMe
drives
b
.
-
● SATA drive:
PCH pass-
through
● NVMe
drive: CPU
pass-
through
FusionServer 2288H V7 Server
Technical White Paper 5 Hardware Description
Issue 02 (2023-05-25) Copyright © xFusion Digital Technologies Co., Ltd. 43