xFusion Digital Technologies FusionServer 2288H V7 - Page 51

Configuratio
n
Front Drive Rear Drive Built-in Drive Drive
Management
Mode
12 x 3.5" drive
pass-through
configuration
2
● Front drive:
12 x 3.5"
– Slots 0
to 11
support
only
SAS/
SATA
drives.
● I/O module
1: 2 x 2.5"
a
– Slots 40
to 41
support
only
SAS/
SATA
drives.
● I/O module
2: 2 x 3.5"
– Slots 42
to 43
support
only
SAS/
SATA
drives.
● I/O module
3: 4 x 2.5"
– Slots 44
to 47
support
only
NVMe
drives
b
.
-
● SAS/SATA
drive: 1 x
PCIe plug-
in RAID
controller
card
The PCIe
plug-in
RAID
controller
card is
installed in
slot 3 by
default.
● NVMe
drive: CPU
pass-
through
12 x 3.5" drive
pass-through
configuration
3
● Front drive:
12 x 3.5"
– Slots 0
to 11
support
only
SAS/
SATA
drives.
● I/O module
3: 4 x 2.5"
– Slots 44
to 47
support
only
NVMe
drives
b
.
● Built-in
drive: 4 x
3.5"
– Slots 36
to 39
support
only
SAS/
SATA
drives.
● SAS/SATA
drive: 1 x
PCIe plug-
in RAID
controller
card
The PCIe
plug-in
RAID
controller
card is
installed in
slot 3 by
default.
● NVMe
drive: CPU
pass-
through
FusionServer 2288H V7 Server
Technical White Paper 5 Hardware Description
Issue 02 (2023-05-25) Copyright © xFusion Digital Technologies Co., Ltd. 44