xFusion Digital Technologies FusionServer 2288H V7 - A.3 Operating Temperature Limitations

A.3 Operating Temperature Limitations
Table A-7 Operating temperature limitations
Configurat
ion
Maximum
Operating
Temperatu
re 30℃
(86°F)
Maximum
Operating
Temperatu
re 35ºC
(95°F)
Maximum
Operating
Temperatu
re 40ºC
(104°F)
Maximum
Operating
Temperatu
re 45ºC
(113°F)
Maximum
Operating
Temperatu
re 50ºC
(118 °F)
8 x 2.5"
drive pass-
through
configuratio
n
● 6434/64
34H
CPUs
and
CPUs
with
TDP
greater
than 205
W are
not
supporte
d when
the built-
in 4-card
module
is
configur
ed.
● 6434/64
34H
CPUs
and
CPUs
with
TDP
greater
than 205
W are
not
supporte
d when
the built-
in 4-card
module
is
configur
ed.
● CPUs
with
TDP
greater
than 250
W are
not
supporte
d.
● A40
GPU
cards
are not
supporte
d.
● OCP 3.0
NICs
whose
rate is
greater
than 100
Gbit/s
are not
supporte
d.
● 6434/64
34H
CPUs
and
CPUs
with
TDP
greater
than 205
W are
not
supporte
d when
the built-
● CPUs
with
TDP
greater
than 185
W are
not
supporte
d.
● GPU
cards
are not
supporte
d.
● Rear
HDDs
and
NVMe
drives
are not
supporte
d.
● OCP 3.0
NICs
whose
rate is
greater
than 25
Gbit/s
are not
supporte
d.
● PCIe
NICs
whose
rate is
greater
than 100
Gbit/s
● CPUs
with
TDP
greater
than 165
W are
not
supporte
d.
● The rear
GPU
cards
are not
supporte
d.
● Rear
HDDs
and
NVMe
drives
are not
supporte
d.
● OCP 3.0
NICs
whose
rate is
greater
than 10
Gbit/s
are not
supporte
d.
● PCIe
NICs
whose
rate is
greater
than 25
FusionServer 2288H V7 Server
Technical White Paper A Appendix
Issue 02 (2023-05-25) Copyright © xFusion Digital Technologies Co., Ltd. 135