5.5.2 Drive Indicators
SAS/SATA Drive Indicators
Figure 5-50 SAS/SATA drive indicators
Table 5-36 SAS/SATA drive indicator description
Activity Indicator
(Green)
Fault Indicator
(Red/Blue)
Description
Off Off The drive is not detected.
Steady on Off The drive is detected.
Blinking at 4 Hz Off Data is being read or written properly, or
data on the primary drive is being
rebuilt.
Steady on Blinking blue at 4
Hz
The drive is being located.
Blinking at 1 Hz Blinking red at 1
Hz synchronously
Data on the secondary drive is being
rebuilt.
Off Red steady on A drive in a RAID array is removed.
Steady on Red steady on The drive is faulty.
FusionServer 2288H V7 Server
Technical White Paper 5 Hardware Description
Issue 02 (2023-05-25) Copyright © xFusion Digital Technologies Co., Ltd. 76
To Next Page
Loading...
