xFusion Digital Technologies FusionServer 2288H V7 - 25 X 2.5 Drive EXP Configurations

5.5.1.7 25 x 2.5" Drive EXP Configurations
Drive Configurations
Table 5-34 Drive configurations
Configuratio
n
Front Drive Rear Drive Built-in Drive Drive
Management
Mode
25 x 2.5" Drive
EXP
Configurations
● Front drive:
25 x 2.5"
– Slots 0
to 24
support
only
SAS/
SATA
drives.
● I/O module
1: 2 x 2.5"
a
– Slots 40
to 41
support
only
SAS/
SATA
drives.
● I/O module
2: 2 x 2.5"
a
– Slots 40
to 41
support
only
SAS/
SATA
drives.
● I/O module
3: 4 x 2.5"
– Slots 44
to 47
support
NVMe
drives
b
.
-
● SAS/SATA
drive: 1 x
PCIe plug-
in RAID
controller
card
The PCIe
plug-in
RAID
controller
card is
installed in
slot 3 by
default.
● NVMe
drive: CPU
pass-
through
● a: The I/O module (2 x 2.5") is configured with the module with 2 x 2.5" rear
drives and one PCIe riser card.
● b: NVMe drives are supported when CPU 2 is configured. A single-CPU server
does not support NVMe drives.
● For details about the optional components, consult the local sales
representative or see "OS and Parts Compatibility" in the Compatibility
Checker.
FusionServer 2288H V7 Server
Technical White Paper 5 Hardware Description
Issue 02 (2023-05-25) Copyright © xFusion Digital Technologies Co., Ltd. 73