xFusion Digital Technologies FusionServer 2288H V7

To Next Page

To Previous Page

NVMe Drive Indicator

Figure 5-51 NVMe drive indicator

● If the VMD function is enabled and the latest VMD driver is installed, the NVMe

drives support surprise hot swap.

Table 5-37 NVMe drive indicator description (VMD function enabled)

Activity

Indicator

(Green)

Fault Indicator

(Red/Blue)

Description

Off Off The NVMe drive is not detected.

Steady on Off The NVMe drive is detected and

operating properly.

Blinking at 4 Hz Off Data is being read from or written to

the NVMe drive.

Steady on/

blinking

Blinking blue at 4

The NVMe drive is being located.

Blinking at 1 Hz Blinking red at 1

Hz synchronously

Data on the NVMe secondary drive is

being rebuilt.

Steady on/Off Red steady on The NVMe drive is faulty.

● If the VMD function is disabled, the NVMe drives support only orderly hot swap.

Table 5-38 NVMe drive indicator description (VMD function disabled)