xFusion Digital Technologies FusionServer 2288H V7 - Page 40

Configuratio
n
Front Drive Rear Drive Built-in Drive Drive
Management
Mode
8 x 2.5" drive
pass-through
configuration
2
● Front drive:
8 x 2.5"
– Slots 0
to 7
support
only
SAS/
SATA
drives.
● I/O module
3: 4 x 2.5"
– Slots 44
to 47
support
only
NVMe
drives
a
.
-
● SAS/SATA
drive: 1 x
PCIe plug-
in RAID
controller
card
The PCIe
plug-in
RAID
controller
card is
installed in
slot 3 by
default.
● NVMe
drive: CPU
pass-
through
8 x 2.5" drive
pass-through
configuration
3
● Front drive:
8 x 2.5"
– Slots 0
to 7
support
only
SATA/
NVMe
drives
a
.
-
- ● SATA drive:
PCH pass-
through
● NVMe
drive: CPU
pass-
through
8 x 2.5" drive
pass-through
configuration
4
● Front drive:
8 x 2.5"
– Slots 0
to 7
support
SAS/
SATA/
NVMe
drives
a
.
-
- ● SAS/SATA
drive: 1 x
PCIe plug-
in RAID
controller
card
The PCIe
plug-in
RAID
controller
card is
installed in
slot 3 by
default.
● NVMe
drive: CPU
pass-
through
FusionServer 2288H V7 Server
Technical White Paper 5 Hardware Description
Issue 02 (2023-05-25) Copyright © xFusion Digital Technologies Co., Ltd. 33