Specifications
Under normal use of condition, this equipment should be kept a separation
distance of at least 20 cm between the antenna and the body of the user.
Robot Vacuum
Dimensions ø 325 × 98 mm
45 WRated Power
Charging Voltage
Name Robotic Vacuum Cleaner
D106Model
20 V
3.5 kgNet Weight
Wireless Connectivity
Wi-Fi IEEE 802.11 b/g/n 2.4 GHz
Bluetooth 4.2
14.4 VRated Voltage
Operation Frequency 2400–2483.5 MHz
Maximum Output Power < 20 dBm
2900 mAh (rated capacity)
3200 mAh (nominal capacity)
Baery Capacity
15
Error Prompt Possible Cause and Solution
Place the robot vacuum
on a horizontally flat floor
surface and start it.
The robot vacuum is tilted at startup. Move it to
a horizontally flat floor and restart it. You can
also reset the level of the robot vacuum in the
Mi Home/Xiaomi Home app, then turn it off and
restart it.
Make sure the laser
distance sensor is not
blocked before starting
the robot vacuum.
Please wipe the cliff
sensors clean. Move the
robot vacuum to a new
place and restart it.
Clear any foreign objects that may block or
obstruct the laser distance sensor, or move the
robot vacuum to a new place and restart it.
Part of the robot vacuum may be off the ground,
re-position the robot vacuum and restart it. Or,
the cliff sensors may be dirty, wipe them clean.
Check and remove any
foreign objects from the
collision sensors.
The collision sensors may be stuck. Gently tap
them several times to remove any foreign
objects. If nothing falls out, move the robot
vacuum to a different place and restart it.
The robot vacuum may be caught or stuck.
Clear away any obstructions around it.
Remove any obstacles
around the robot
vacuum and try again.
Manually place the robot vacuum onto the
charging dock and check if the charging
dock is connected to power.
Couldn't return to the
dock to charge, please
move the robot vacuum
to the charging dock.
Dimensions
Power Consumption
Time to Enter the Condition
Standby mode: ≤0.5 W
Standby mode: ≤20 min
146 × 122 × 98 mm
Charging Dock
Rated Output
Rated Input
Model CDZD106
20 V 0.6 A
20 V 0.6 A
To Next Page
Loading...
