04
Baeries and Charging
• WARNING: Do not use any third-party baery, charging dock.
• WARNING: Only use the supply unit provided with this appliance.
• WARNING: For the purposes of recharging the baery, only use the detachable supply
unit provided with this appliance.
• Use only with <BLJ15W200060P-VA> or <BLJ15WJ200060P-V> supply unit.
• Do not aempt to disassemble, repair, or modify the baery or charging dock on
your own.
• Disconnect the robot vacuum from power immediately if the baery leaks. If you
come into physical contact with any substance that may leak out of the baery,
rinse the contact area with plenty of water and seek medical aention immediately.
• Do not expose the appliance or baery to excessive temperatures.
• Be aware of the risk of terminals of the baery-operated appliance or baery being
short-circuited by metal objects.
• Do not place the charging dock near a heat source.
• Do not use a wet cloth or wet hands to wipe or clean the dock’s charging contacts.
• If the robot vacuum will not be used for an extended period, fully charge it, then turn it
off and store in a cool, dry place. Recharge the robot vacuum at least once every 3
months to avoid over-discharging the baery.