Xilinx Virtex-6 FPGA Getting Started Guide

Virtex-6 FPGA Connectivity Kit Getting Started www.xilinx.com 19
UG664 (v1.4) July 6, 2011
Getting Started with the Connectivity Targeted Reference Design Demo
e. Click on Next. When the InstallShield wizard completes, click on Finish
(Figure 10). At the end of this install process, the driver and GUI files are copied to
the C:\Program Files\Xilinx Inc\Virtex6 folder. Also, a shortcut to the
Xilinx Performance Monitor (xpmon) GUI is available on the desktop.
X-Ref Target - Figure 10
Figure 10: InstallShield Wizard Copies GUI and Driver Files into Program Files
when Done
UG664_61_060811

Xilinx Virtex-6 FPGA Specifications

General

Brand	Xilinx
Model	Virtex-6 FPGA
Category	Transceiver
Language	English