Xilinx Virtex-6 FPGA Getting Started Guide

38 www.xilinx.com Virtex-6 FPGA Connectivity Kit Getting Started
UG664 (v1.4) July 6, 2011
Installation and Licensing of ISE Design Suite
5. Follow the instructions to generate the license by providing the Host OS information
and Host ID (Disk Serial number or Ethernet MAC address) as shown in Figure 30.
Click Next.
Note:
Laptop users might want to select their Disk ID or Wireless Ethernet card Host ID.
Laptops on docking stations might have three Ethernet Host IDs from which to choose. If a
docking station Host ID is selected, then the license is available only when docked. It is best to
avoid the Host ID of the RJ45 Ethernet connection on laptop computers, because some Ethernet
adapters power down when not plugged into the network. To select an Ethernet adapter, it is best
to select the wireless card.
X-Ref Target - Figure 30
Figure 30: Selecting the Host ID
UG664_31_011710

Xilinx Virtex-6 FPGA Specifications

General

Brand	Xilinx
Model	Virtex-6 FPGA
Category	Transceiver
Language	English