Xilinx ZCU104 - Appendix A: VITA 57.1 FMC Connector Pinouts; Overview

ZCU104 Board User Guide 86
UG1267 (v1.1) October 9, 2018 www.xilinx.com
Appendix A
VITA 57.1 FMC Connector Pinouts
Overview
Figure A-1 shows the pinout of the FPGA mezzanine card (FMC) low pin count (LPC)
connector defined by the VITA 57.1 FMC specification. For a description of how the ZCU104
evaluation board implements the FMC specification, see FPGA Mezzanine Card Interface,
page 76 and FMC LPC Connector J5, page 76.
X-Ref Target - Figure A-1
Figure A-1: FMC LPC Connector Pinouts
X20267-020118
Send Feedback