Xilinx ZCU104 - Monitoring Voltage and Current

ZCU104 Board User Guide 85
UG1267 (v1.1) October 9, 2018 www.xilinx.com
Chapter 3: Board Component Descriptions
Monitoring Voltage and Current
[Figure 2-1, callout 28]
Voltage and current monitoring and control are available on the power rails provided by the
Infineon IRPS5401 power controllers through the Infineon IR PowERCenter graphical user
interface. The onboard Infineon IRPS5401 power controllers listed in Table 3-31 are
accessed through the I2C 1x3 male pin connector J175, which is included with the Infineon
USB cable (Infineon part number USB005). The cable can be ordered from the Infineon
website [Ref 22]). The associated Infineon IR PowERCenter GUI can be downloaded from the
Infineon website. This is the most convenient way to monitor the voltage and current values
for the Infineon PMBus programmed power rails listed in Table 3-31.
Send Feedback