Xinje X-NET fieldbus User Manual

X-NET fieldbus
User manual
Wuxi XINJE Electric Co., Ltd.
Data No. PD06 20151009 3.2

Xinje X-NET fieldbus Specifications

General

Brand	Xinje
Model	X-NET fieldbus
Category	Buses
Language	English

Summary

Preface X-NET introduction

1 X-NET fieldbus

1-1. Function summarize

Overview of X-NET fieldbus functionality, including introduction, wiring, and software.

1-2. Communication instruction

Details on X-NET communication instructions for reading and writing bits and registers.

1-3. Communication address

Information on X-NET PLC soft component addresses and their mapping.

1-4. X-NET Communication application

Practical example of XD3 PLCs communicating via X-NET protocol.

1-5. Communication register

Explanation of special registers used for X-NET communication status and errors.

2 X-NET motion fieldbus

2-1. Function summary

Overview of X-NET motion fieldbus capabilities for multi-axis control.

2-2. Instructions

Detailed explanation of motion fieldbus instructions for controlling servo drives.

3 Teaching function

3-1. SFD register setting

How to set teaching function parameters using SFD registers via software.

3-2. Return the origin

Configuration and modes for the "Return to Origin" function of servo axes.

3-3. Jogging

Functionality and methods for jogging servo motors in forward and reverse directions.

3-4. In-circuit emulation

Using PLC in-circuit emulation mode for simulation without external servo connection.

3-5. Protection

Notes on servo system protection, power on order, and error handling.

4 System coil and register

5 Error message

Appendix 1 XINJE config software

Appendix 2 Servo parameters