2-2-7．Release synchronous run [MOUSYN]
1. Instruction summarize
Release the synchronous motion between master axis and slave axis (or high speed count).
Release synchronous run[MOUSYN]
2. Operand
3. Suitable soft component
*Note: D includes D, HD; TD includes TD, HTD; CD includes CD, HCD, HSCD, HSD; DM
includes DM, DHM; DS includes DS, DHS.
M includes M, HM, SM; S includes S, HS; T includes T, HT; C includes C, HC.
● when M0 is from OFF to ON, release the two axes synchronous running.
S: slave axis number N, the range of N is from 1 to 10;
● please release the synchronous running when master axis and slave axis stop running.
● MOSTOP urgent stop mode can stop the slave axis running and release the synchronous
bundling. At this time, the slave axis will urgent stop and the master slave will keep running. This
mode has speed sudden change. This method is not recommended to use regularly.
To Next Page
Loading...
General