42 43
good, press and hold menu to return to the main display screen.
7 Ensure Edge is tuned to channel 1,
the XM Preview channel. Upon power
up, Edge should tune to channel 1 by
default, when it’s not yet activated. If
it’s not on channel 1, refer to “Listening
to Satellite Radio” on page 55 to learn
about how to tune a channel.
8 Turn on your vehicle’s stereo system.
Set it to play from the auxiliary input
source. You should hear channel 1, the
XM Preview channel, through your
vehicle’s stereo system. You are now
ready to activate your Edge.
9 The audio level output of Edge
can be
increased or decreased as necessary to
match the audio levels of other sources
in your vehicle. Refer to “Set Audio
Level” on page 81.
If the signal reception is good, showing at
least one bar in the upper left corner of the
display, but there is no XM audio, be sure the vehicle’s stereo system is set to the
cassette source (step 4). Also be sure that the audio level is set high enough to
be heard (step 5). Refer to “Troubleshooting” on page 92 for additional help.
Vehicle Installation
1
preview
xmradio.ca
1-877-438-9677
1-877-438-9677
Option 3: PowerConnect Installation Instructions
1 Attach the dock to the mount.
2 Insert your Edge into the dock.
3 Power on your Edge by
pressing the Power button.
4 Be sure the vehicle is outside
and the antenna has a clear
view of the sky. Verify that
you are receiving the XM signal. There should at
least be one bar on the upper left corner of the
main display screen that denotes antenna signal
strength. You can also press menu and then turn
the Rotary Knob to scroll to and highlight Signal
Indicator. Press the Select button. The Satellite
and Terrestrial bars show the strength of the
signal being received. If the signal reception is
good, press and hold menu to return to the main
display screen.
5 You’ll first need to find an available FM
channel. An available FM channel is one
that’s not being used by an FM radio
station in your area. When you tune
your FM radio to an available channel,
you should only hear static or silence
– not talk or music. We recommend
one of the following methods to find an
available FM channel:
To Next Page
Loading...
Need help?
General
