The cursor will automatically move down by the amount of edit steps if inserted by using SHIFT +
CURSOR UP on an empty field in the Pattern Screen.
With SHIFT + DELETE you can delete/empty values
The button OK is mostly used to create new Patterns or Patches and to enter or agree/start a
menu option
Mute/Unmute track: Using the shortcut SHIFT+DOWN+START mutes or unmutes the current track
if in the Sequencer or Pattern screen. Mute does release the gate and keeps the CV voltage, but
won’t play anything else on the muted track until it is unmuted. It will sequence through though
while muted and the Break command is still working. So for example 16 step patterns will stay 16
step even if muted.
Solo/Unsolo track: Using SHIFT + UP + START solos the current track. That means all tracks will
be muted and the current track unmuted if needed. Unsoloing will unmute all tracks. Also, unmuting
other tracks or muting the solo track will release the solo function.
For fast unmuting all tracks you can press SHIFT + UP + START for the solo function twice and all
tracks are unmuted directly.
While in the → Pattern screen you can hold the PATTERN button and use the cursor keys to
navigate between patterns (in the order of the sequencer arrangement)
While in the → Table screen you can hold the TABLE button and use the cursor Up and down keys
to navigate between the tables.
Note the same Mute/Solo functions can be used with the Trigger16 Expander when on the pattern
screen.
NerdSEQ – a tracker based Eurorack sequencer Page 15
User Manual Revision V1.26 for Firmware V1.26 12 July 2022
To Next Page
Loading...