Quick Reference Guide
DBALL/DBALL2-TL1 Remote Start Ready (RSR) Installation
© 2015 Directed. All rights reserved.
Activating/deactivating EIPS:
To activate EIPS, remove all keys from the vehicle and close all doors while the
engine is running.
To deactivate EIPS, do one of the following actions:
Open one of the doors.
Remote start the vehicle.
Turn the engine off.
Drive the vehicle.*
* The EIPS feature is disabled if the vehicle is in motion so there is no risk that the
vehicle will shut off while driving, regardless of the fob being present in the vehicle
or not.
Notes
Note: Takeover feature is not available on Push-to-Start vehicle. The engine will
stop when a door is opened.
Vehicle Takeover for Push-To-Start vehicles
To Previous Page
Loading...
