With the VCI box, IP819 TP can communicate with the vehicle and get information on TPMS system like the sensor ID
written inside the system, the fault codes (DTCs) recorded in the system and so on. Before doing this, make sure that you
have the VCI box connected to the OBD port of the vehicle.
XTOOL SENSOR PROGRAMMING
IP819 TP can write specific IDs into XTOOL Tire Pressure Sensors before they are applied into the tires. There are
several options to program the sensors, we will introduce them one by one in the following sections.
To Next Page
Loading...
Need help?
General
