37
7.2 Function of the push buttons
Ï Start of the HYDROVAR or increase the value in the menu
Ð Stop of the HYDROVAR or decrease the value in the menu
¾ Short pressing: Change to next parameter in the menu
¾ + Ð Change to previous parameter in the menu
¾ Long pressing: Enter the submenu or change back to the main menu
Ï + Ð Saving of all settings
¾ + Ï Long pressing: The auxiliary texts of the actual parameter is shown
or language selection in the first window
Ð + short Ï Change to faster scrolling down of the value
Ï + short Ð Change to faster scrolling up of the value
¾ + Ð + Ï RESET of a failure by pressing all three buttons simultaneously for about
5 seconds
7.3 Language Selection
The information on the display and all parameters can be called up in the following
languages:
• German • French • Dutch
• English • Spanish
• Italian • Portuguese
To select the desired language proceed as follows:
• Shortly press ¾ + Ï simultaneously (in 1
st
display)
⇒ The actual language will now appear in the second line
• The desired language can be selected with the button Ï or Ð.
• After the language has been selected, shortly press the ¾ button and the display will
change back to the first window of the main menu.
• The selection of the language will be saved automatically
To Next Page
Loading...
