Xylem Lowara Genyo plus - Handling and Storage Procedures; Unit Inspection and Storage Conditions

en - Original instructions
Genyo plus, Additional Installation, Operation and Maintenance Instructions 7
2 Handling and Storage
2.1 Handling of the packed unit
WARNING:
Take appropriate measures during transport, installation and storage to prevent contamination
from external substances.
The Manufacturer delivers the unit and its components in a cardboard box.
2.2 Unit inspection upon delivery
2.2.1 Inspect the package
1. Check that quantity, descriptions and product codes match the order.
2. Check the packaging for any damage or missing components.
3. In case of immediately detectable damage or missing parts:
- accept the goods with reserve, indicating any findings on the transport document, or
- reject the goods, indicating the reason on the transport document.
In both cases, promptly contact Xylem or the Authorised Distributor from whom the product
was purchased.
2.2.2 Unpacking and inspection of the unit
1. Remove packing materials from the product.
2. Check the unit for integrity and to make sure that there are no missing components.
3. In case of damage or missing components, promptly contact Xylem or the Authorised
Distributor.
Content of the package
• Unit
• Two M20x2.5 cable glands
• Instructions manual.
2.3 Storage
Storage of the packed unit
The unit must be stored:
• In a covered and dry place
• Away from heat sources
• Protected from dirt
• Protected from vibrations
• At an ambient temperature between -25°C and +65°C (-13°F and 149°F), and humidity
between 5% and 95%.
NOTICE:
Do not place heavy loads on top of the unit.
NOTICE:
Protect the unit from collisions.