4. When the desired meter has been selected in the list, click on the Meter Detail tab or
double-click on the desired meter.
Notice that there are five tabs about halfway down the screen labeled: Readings, Notes,
Questions, Imported Data, and Work Order.
5. To add a reading, click the Readings tab. Click the Add Reading button in the lower
right corner of the screen to add a reading. A dialog box will appear allowing the
reading to be entered. An advisory note also appears to remind you to perform a Re-
Process function after entering all notes and readings to ensure that they are added to
the reading file that is transferred into the billing software.
6. Similarly, to add a notecode to an account, click the Notes tab from within the Route
Detail screen and click the Add Note button in the lower right corner of the screen.
A dialog box displays allowing you to enter a note. The note can be chosen from the
drop-down menu, or you may simply begin typing a note using the keyboard.
Depending on the billing software being used, notecodes may or may not be transferred
into the billing system from the HHD or the AutoRead software. Consult your particular
7 Additional Route Processing Options | 86
To Next Page
Loading...
Need help?
General
