SonTek, a Xylem brand
RiverSurveyor S5/M9 System Manual (February 2013)
47
Figure 46. Data Collection – End Edge
Figure 47. Data Collection - End Edge dialog box
6.11.5.
End Transect
Click the End Transect (Figure 48) button upon completion of the end edge. This automatically
opens a new data collection window so you can start a new measurement. The system is still
running, so if you need to make another measurement, click the Start Edge button (or F5) to
begin again as instructed in Section 6.11.2. If data collection is complete, click the Abort button
To Next Page
Loading...
