Xylem SonTek River Surveyor S5 - Page 160

SonTek, a Xylem brand
150 RiverSurveyor S5/M9 System Manual (February 2013)
Figure 134. Loop Method Processing
6. Click on the LC icon at the end of the Track Reference options in the Processing Toolbox on
the right side of the screen. Click Apply to all to apply the loop correction to the open
measurements. As soon as the correction (if valid) is applied, the Discharge Summary and
the side bar summary table will update to show the “Loop Corrected Total Q” as shown in
Figure 135:
Figure 135. Loop Method Correction