NOTE: The bass and treble levels are only adjustable when EQ is on “User” mode.
The loudness function compensates for deficiencies in sound ranges at low levels. Loudness levels
range from 1-4 or “off”. When the loudness function is on, LOUD is displayed on the screen.
Exiting the audio control menu
Touch the return arrow on the top right of the display.
Press the (ESC) button on the remote control to exit the audio control menu.
System Reset
To correct a system halt or other unusual operation, use the tip of a pen to press the RESET button
located on the front bottom-right corner of the unit. After a system reset, the unit restores the
settings before last power off.
Mute
Press the MUTE button on the front panel or the MUTE button ( ) on the remote control to
mute the playback volume.
NOTE: Press the MUTE button again to restore the volume.
Adjusting the volume or using any of the audio set-up features will cancel the mute function.
13
To Next Page
Loading...