EasyManua.ls Logo

XZENT xt7010 - Preparation; Features; Warnings

XZENT xt7010
74 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Preparation
Features
INTEGRATED DVD/CD/MP3/WMA-PLAYER
Playback of CD, CD-R/RW, MP3, WMA, DVD,
DVD-R/RW, DVD+R/RW and DVD-MP3
Region code 2
Integrated Dolby Digital decoder
Electronic (ESP) and mechanical anti-shock system
MOTORIZED LCD MONITOR
Fully motorized high-quality 7"/16:9 LCD display with touchscreen-control
TUNER
FM/AM-tuner
30 preset stations (18 FM/12 AM)
Radio data system (RDS)
A/V-CONNECTIONS
2 x RCA composite video outputs
Analog 4.1 RCA preamp line outputs (front, rear and
subwoofer)
1 x RCA Aux-In (stereo)
ADDITIONAL FEATURES
Integrated 4 x 40 watts digital amplifier
Blue and white backlit key illumination and high contrast blue dot-matrix status display
ISO connectors for power supply and speakers
IR-remote control
WARNINGS
1. Only connect the unit to a 12-volt negative ground system.
2. Never install this unit where operation and viewing could interfere with safe driving conditions.
3. To reduce the risk of a traffic accident (except when using for rear view video camera), never use
the video display function while driving the vehicle. This is a violation of law.
4. To reduce the risk of a traffic accident, never drive with the sound at a level, that prevents you
from hearing sounds outside around the vehicle.
5. Never disassemble or adjust the unit without the assistance of a professional installer.
For details, please consult your local car stereo specialty shop.
6. To prevent injury from shock or fire, never expose this unit to moisture or water.
7. Never use irregular discs.
8. To prevent damage to the mechanism inside this unit, avoid impact to the TFT monitor.
9. Do not change the fuse on the power wire without professional guidance. Using an improper
fuse may cause damage to the unit and result in a fire.
10. The monitor employs an automatic motorized mechanism. To prevent damage to the core
mechanism, please do not push, pull or swivel the monitor manually.
4
MANUAL XT7010:Layout 1 16.11.2007 17:16 Uhr Seite 4

Table of Contents