Adjusting a feature
1. Enter the option field for the feature you want to adjust by pressing the (OK) button on the
remote control. A submenu appears in a second row with the selected option.
2. Select a new value by pressing the direction button.
3. Confirm your selection by pressing the (OK) button. The new value setup is complete.
Adjusting the clock
1. Access the “Clock” setting under the general setup menu.
2. Press the direction button on the remote control to move the cursor to the “Hour” or “Min” position,
and press the (OK) button. You also can touch the “Hour” or “Min” position directly.
3. The numeric keypad will pop up.
4. Press the numeric button on the remote control or touch the numeric keypad on the screen to
adjust the hour or minutes.
5. Press the (OK) button on the remote control or on the keypad of the screen to confirm the setup.
Return to normal playback
The system will automatically return the previous playback mode you were in before accessing
the setup menu after setting with no operation.
Setting Options Function
Radio
USA
Select the appropriate setting based on the country in which
S-Amer1
you reside.
S-Amer2
Europe
Video out
Disable
Select whether to activate video out.
Enable
TFT Auto Open
On The TFT panel automatically opens when the unit is turned on.
Off
You must press the button on the TFT panel or the button
on the remote control to open the TFT .
Manual
The monitor does not open or close when the unit is turned on
or turned off.
Clock Mode
12Hr Clock displays 12 hour time using AM and PM.
24Hr Clock displays 24 hour time up to 23:59.
Clock 00:27 Present time.
Load Factory No/Yes Load all factory parameters to their original setting.
17
To Next Page
Loading...