Yaesu FT-252 - Configuration Settings (Items 8-20)

FT-252 OperaTing Manual54
Set
(
Menu
)
Mode
Function
Stores Alpha-Numeric “Tags” for the Memory channels.
Toggles the display indication between “frequency” and the
channel’s “Alpha/Numeric Tag.”
Enables/disables the Password feature.
Stores the password.
Sets the magnitude of the repeater Shift.
Selects the Scan Resume mode.
Selects the function of the
[
HM/RV
]
key.
Adjusts the RF Squelch threshold level.
Sets the Repeater Shift Direction.
Enables/disables the Priority Revert feature.
Selects the Receive-mode Battery Saver interval (“sleep” ratio)
Selects the Smart Search Sweep mode.
Selects the Memory Scan channel-selection mode.
Enables/Disables the Scan lamp while paused.
Selects the Memory Scan “Skip” channel-selection mode.
Enables or disables “VFO Split” operation.
Selects the Tone Encoder and/or Decoder mode.
Indicate the current temperature inside the transceiver’s case.
Setting of the CTCSS Tone Frequency.
Setting of the TOT time.
Enables/Disables the Transmitter Battery Saver.
Select Wide (±5 kHz) or Narrow (±2.5 kHz) TX Deviation.
Enables/Disables the Weather Alert Scan feature.
AvAilAble vAlues
(
DeFAult: Bold ItalIc
)
---
FREQ / ALPHA
PWD.OFF / PWD. ON
---
0.00 - 99.95 MHz
BUSY / HOLD / TIME
< REV > / < HOME >
S-1 / S-2 / S-3 / S-4 / S-5 /
S-7 / S-FULL / OFF
RPT.OFF / RPT.
–
/ RPT. +
RVT.OFF / RVT. ON
200 MS / 300 MS /500 MS /
1 SEC / 2 SSEC / OFF
SINGLE / CONT
ONLY / MEM
ON / OFF
OFF / SKIP / ONLY
SPL.OFF / SPL. ON
OFF / TONE / TSQL /
REV TN / DCS / ECS
---
50 CTCSS tones (100 Hz)
1MIN - 30MIN or OFF
SAV.OFF / SAV. ON
WIDE / NARROW
ALT.OFF / ALT. ON
set MoDe iteM
24
[
MEM.TAG
]
25
[
NAME
]
26
[
PASSWD
]
27
[
PSWD W
]
28
[
R SHFT
]
29
[
RESUME
]
30
[
REV/HM
]
31
[
RF SQL
]
32
[
RPT.MOD
]
33
[
PRI.RVT
]
34
[
RXSAVE
]
35
[
S SRCH
]
36
[
SCN MD
]
37
[
SCN.LMP
]
38
[
SKIP
]
39
[
SPLIT
]
40
[
SQL.TYP
]
41
[
TEMP
]
42
[
TN FRQ
]
43
[
TOT
]
44
[
TXSAVE
]
45
[
WID.NAR
]
46
[
WX ALT
]
honbun_130314.indd 54 2013/03/14 17:45:42