Yaesu FT-252 - Page 57

FT-252 OperaTing Manual 55
Set Mode Item 1
[
ANI
]
Function: Enables/Disables the ANI function.
Available Values: ANI.OFF/ANI. ON
Default: ANI. OFF
Set Mode Item 2
[
ANI.WRT
]
Function: Program the ANI Identier.
See page 45 for details.
Set Mode Item 3
[
APO
]
Function: Setting of the Automatic Power-Off feature.
Available Values: OFF/0.5H - 12.0 H in 0.5 hour multiples
Default: OFF
Set Mode Item 4
[
AR BEP
]
Function: Selects the Beep option during ARTS operation.
Available Values: INRANG/ALWAYS/OFF
Default: INRANG
INRANG: Beeps sound only when the radio rst detects that you are within range.
ALWAYS: Beeps sound every time a polling transmission is received from the other sta-
tion (every 15 or 25 seconds when in range).
OFF: No alert beeps sound.
Set Mode Item 5
[
ARS
]
Function: Enables/Disables the Automatic Repeater Shift function.
Available Values: ARS. ON/ARS.OFF
Default: ARS. ON
Set Mode Item 6
[
BCLO
]
Function: Enables/Disables the Busy Channel Lock-Out feature.
Available Values: BCL. ON/BCL.OFF
Default: BCL.OFF
Set Mode Item 7
[
BEEP
]
Function: Enables/Disables the beeper.
Available Values: KEY+SC/KEY/OFF
Default: KEY
KEY+SC: The beeper sounds when you press any key, or when the scanner stops.
KEY: The beeper sounds when you press any key.
OFF: Beeper is disabled.
Set
(
Menu
)
Mode
honbun_130313.indd 55 2013/03/13 19:48:11