Yale Assure Lever YRL216 - Installation Step 4: Install Keypad; Keypad Orientation and Hole Size

P/N YRL-PB-MNL-0017 Rev C
Part of ASSA ABLOY
6
Install Keypad
Right Hand Installation Shown
4
Outside of
Right Hand Door
Inside of
Right Hand Door
“TOP” mark must be
on top surface and tailpiece
in vertical position.
Incorrect orientation will
cause lock to fail.
Door face hole
must be at least
2-1/8".
If hole is too
small, a door lock
installation kit or
jig should be used
to increase hole
size.