Yale Assure Lock SL

7
Tamper Alarm
0xA1
0x01
keypad attempts
exceed code
entry limit
0x06
0X10
0x02
front escutcheon
removed from
main
0x06
0xFE
Battery is fully
charged
0x80
0x05
After a low
battery alert
was observed,
the lock was
powered down
and powered
back up with full
battery.
0x08
0x0D
Door Lock needs
Time set
0x82
0x00
Power to the
lock was
restored and the
locks RTC was
cleared. The
controller should
set the time to
ensure proper
logging.
0x08
0x01
Low Battery
Alarms***
0xA7
0x(Current
%)
Low Battery
(Starting at
4.0V)
0x08
0x0A
0xA8
0x(Current
%)
Critical Battery
Level (Starting
at 3.9V)
0x08
0x0B
** The Yale lock also supports a 3
rd
low battery alarm: too low to operate. This
alarm is sent out as a Battery Report (with value = 0xFF) through the Battery
Command Class. This is the last low battery alarm level before the product stops
functioning.