Table 1. Instrument and Controls (See Figure 3, Figure 4, Figure 5, Figure 6, and Figure 7) (Continued)
Item No. Item Function
1 Traction Reverse Button
WARNING
The traction reverse button causes rapid acceleration and should not be used
for changing direction.
The traction reverse button is on the end of the control handle. The button is pushed
when it contacts the operator or another object. When the button is pushed, the lift
truck will move away from the operator (forks first), and a series of beeps will sound.
When the button is no longer pushed, the traction motor will be turned OFF. The
traction motor will not move the lift truck in the direction of the control handle until
the control is reset. To reset, move the speed/direction control to the OFF position
or move the handle to the BRAKE ON position.
4 Horn Button The horn operates when the key is in the ON position and the horn button is
pushed.
3 Lift Button The Proportional lift button energizes the hydraulic system to raise the mast. The lift
button is a variable speed switch. Press the button to begin lifting. The further you
push the button, the faster the lift speed. Release the button to stop raising.
If the horn sounds when the lift button is pressed, this indicates that the battery is
discharged below 70% and needs to be changed or recharged. Lift is disabled at
80% discharge of the battery.
Model Description
22
To Next Page
Loading...
