Table 1. Instrument and Controls (See Figure 3, Figure 4, Figure 5, Figure 6, and Figure 7) (Continued)
Item No. Item Function
3 Lower Button The Proportional lower button energizes the lowering solenoid to lower the mast.
The lower button is a variable speed switch. Press the button to begin lowering. The
further you push the button, the faster the lower speed. Release the button to stop
lowering.
1 Tilt Forward Button The Walkie High Lift Counterbalance Truck (MCW) and High Lift Reach Truck
(MRW) have button controls for Tilt.
To activate the Tilt control on the Walkie High Lift Counterbalance Truck, press the
Tilt Forward Button to tilt the forks down. Release the button to stop the fork motion.
To activate the Tilt control on the Walkie High Lift Reach Truck, first press and hold
the grey Shift button, then the Tilt Forward button (BOTH MUST be pressed) to tilt
the forks down. Release the buttons to stop the fork motion.
The Tilt Function is a timed function and will stop after 7 seconds.
Model Description
23
To Next Page
Loading...
