Table 1. Instrument and Controls (See Figure 3, Figure 4, Figure 5, Figure 6, and Figure 7) (Continued)
Item No. Item Function
1 Tilt Back Button To activate the Tilt control on the Walkie High Lift Counterbalance Truck, press the
Tilt Back Button to tilt the forks up. Release the button to stop the fork motion.
To activate the Tilt control on the Walkie High Lift Reach Truck, first press and hold
the grey Shift button, then the Tilt Back button (BOTH MUST be pressed) to tilt the
forks up. Release the buttons to stop the fork motion.
The Tilt Function is a timed function and will stop after 7 seconds.
Model Description
24
To Next Page
Loading...
