3. Remove the loose flange
locking ring and the advance
band (four-piece wheel only)
using a tire tool.
4. Remove the press and
remove the loose flange lock-
ing ring and the advance band
(four-piece wheel only) from
the tire and wheel assembly.
5. Push the TBS or TSR
toward the inside of the tire to
remove it.
Install Tire on Wheel
WARNING
Damage to the tire and wheel
assembly and injury or
death can occur if you do
not do the following proce-
dures:
• Clean and inspect all parts of the wheel before instal-
ling the tire.
• DO NOT use any damaged or repaired wheel parts.
• Make sure that all parts of the wheel are the correct
parts for that wheel assembly.
• DO NOT mix parts between different types or manu-
facturers of wheels.
• DO NOT mix types of tires, type of tire tread, or wheel
assemblies of different manufacturers on any one lift
truck.
Maintenance
184
To Next Page
Loading...
Need help?
General
