Table 3. Operator Controls (See Figure 9) (Continued)
Item
No.
Item Function
9
(Cont)
Tilt Control Lever These trucks can be equipped with the Return to Set Tilt (RTST) option if truck has
electronic hydraulic mini-levers. The RTST option automatically stops the tilt function
at a set point. To override the RTST option, press the override button located directly
behind the tilt mini-lever and push the tilt mini-lever forward or pull backward.
RTST is intended as an operator aid in positioning forks or attachments for their
application to minimize product damage and facilitate load handling. Care should be
taken to operate the truck in accordance with load handling instructions as described
in Operating Techniques in the Operating Procedures section of this Operating
Manual.
Model Description
49
To Next Page
Loading...
Need help?
General
