Yamaha 1999 YZF-R6 Service Manual

1-4
CHECKING THE CONNECTIONS
GEN
INFO
NOTE:
NOTE:
NOTE:
EB103000
CHECKING THE CONNECTIONS
Check the leads, couplers, and connectors for
stains, rust, moisture, etc.
1. Disconnect:
 lead
 coupler
 connector
2. Check:
 lead
 coupler
 connector
Moisture  Dry with an air blower.
Rust/stains  Connect and disconnect sev-
eral times.
3. Check:
 all connections
Loose connection  Connect properly.
If the pin
1
on the terminal is flattened, bend it
up.
4. Connect:
 lead
 coupler
 connector
Make sure that all connections are tight.
5. Check:
 continuity
(with the pocket tester)
Pocket tester
90890-03112
 If there is no continuity, clean the terminals.
 When checking the wire harness, perform
steps (1) to (3).
 As a quick remedy, use a contact revitalizer
available at most part stores.

Yamaha 1999 YZF-R6 Specifications

General

Bore x Stroke	65.5 mm x 44.5 mm
Compression Ratio	12.4:1
Ignition	Digital TCI
Transmission	6-speed
Final Drive	Chain
Front Suspension	Telescopic fork
Front Brakes	Dual 298 mm discs
Front Tire	120/60-ZR17
Rear Tire	180/55-ZR17
Wheelbase	1, 380 mm (54.3 in)
Seat Height	820 mm (32.3 in)
Engine Type	liquid-cooled, DOHC, inline 4-cylinder
Rear Suspension	Single shock
Rear Brakes	220mm disc
Fuel Capacity	17 l (4.5 US gal)
Dry Weight	169 kg