Yamaha 1999 YZF-R6 Service Manual

7-8
Order Job/Part Q’ty Remarks
1
2
3
4
5
6
7
8
9
10
11
Removing the rear wheel
Brake caliper
Locknuts (left and right)
Adjusting bolts (left and right)
Wheel axle nut
Washer
Rear wheel axle
Left adjusting block
Right adjusting block
Rear wheel
Brake caliper bracket bolt
Brake caliper bracket
1
2
2
1
1
1
1
1
1
1
1
Remove the parts in the order listed.
Place the motorcycle on a suitable stand
so that the rear wheel is elevated.
Loosen.
Loosen.
Make sure that the tapered side of the right
adjusting block faces the wheel.
For installation, reverse the removal
procedure.
NOTE:
NOTE:
150 Nm (15 mkg)
40 Nm (4.0 mkg)
REAR WHEEL, BRAKE DISC, AND REAR WHEEL
SPROCKET
CHAS
EAS00550
REAR WHEEL, BRAKE DISC, AND REAR WHEEL SPROCKET
REAR WHEEL

Yamaha 1999 YZF-R6 Specifications

General

Bore x Stroke	65.5 mm x 44.5 mm
Compression Ratio	12.4:1
Ignition	Digital TCI
Transmission	6-speed
Final Drive	Chain
Front Suspension	Telescopic fork
Front Brakes	Dual 298 mm discs
Front Tire	120/60-ZR17
Rear Tire	180/55-ZR17
Wheelbase	1, 380 mm (54.3 in)
Seat Height	820 mm (32.3 in)
Engine Type	liquid-cooled, DOHC, inline 4-cylinder
Rear Suspension	Single shock
Rear Brakes	220mm disc
Fuel Capacity	17 l (4.5 US gal)
Dry Weight	169 kg