Yamaha CDX-E200 Service Manual (English)

To Next Page

CDX-E200

100745

SERVICE MANUAL

CDX-E200

IMPORTANT NOTICE

This manual has been provided for the use of authorized YAMAHA Retailers and their service personnel.

It has been assumed that basic service procedures inherant to the industry, and more specifically YAMAHA Products, are already

known and understood by the users, and have therefore not been restated.

WARNING: Failure to follow appropriate service and safety procedures when servicing this product may result in personal

injury, destruction of expensive components and failure of the product to perform as specified. For these reasons,

we advise all YAMAHA product owners that all service required should be performed by an authorized

YAMAHA Retailer or the appointed service representative.

IMPORTANT: The presentation or sale of this manual to any individual or firm does not constitute authorization, certification or

recognition of any applicable technical capabilities, or establish a principle-agent relationship of any form.

The data provided is believed to be accurate and applicable to the unit(s) indicated on the cover. The research, engineering, and

service departments of YAMAHA are continually striving to improve YAMAHA products. Modifications are, therefore, inevitable

and specifications are subject to change without notice or obligation to retrofit. Should any discrepancy appear to exist, please contact

the distributor's Service Division.

WARNING: Static discharges can destroy expensive components. Discharge any static electricity your body may have accumu-

lated by grounding yourself to the ground buss in the unit (heavy gauge black wires connect to this buss).

IMPORTANT: Turn the unit OFF during disassembly and parts replacement. Recheck all work before you apply power to the unit.

ERROR MESSAGE...............................................10–11

IC DATA ................................................................12–16

DISPLAY DATA ..........................................................17

BLOCK DIAGRAM................................................18–19

PRINTED CIRCUIT BOARD ................................20–23

IC BLOCK .............................................................24–25

PIN CONNECTION DIAGRAM................................... 25

SCHEMATIC DIAGRAM ............................................. 26

PARTS LIST.......................................................... 27–35

■ CONTENTS

TO SERVICE PERSONNEL ..................................... 1–2

PREVENTION OF ELECTROSTATIC DISCHARGE TO

ELECTROSTATICALLY SENSITIVE DEVICES ......... 2

REAR PANELS ............................................................. 3

SPECIFICATIONS......................................................... 3

INTERNAL VIEW .......................................................... 4

DISASSEMBLY PROCEDURES ..............................4–5

STANDARD OPERATION CHART .......................... 6–7

TEST MODE..............................................................8–9

CRX-E200 is composed of RX-E200 and

CDX-E200. This is a service manual for

the CDX-E200.

For service manuals of RX-E200, please

refer to the service manuals with the

following publication numbers :

RX-E200 100742

For the system operation, please refer

to Service Manual for the RX-E200.

MINI COMPONENT SYSTEM CRX-E200

Other manuals for Yamaha CDX-E200

Owner's Manual31 pages

Need help?

Do you have a question about the Yamaha CDX-E200 and is the answer not in the manual?

Yamaha CDX-E200 Specifications

General

Type	CD Player
Disc Compatibility	CD, CD-R/RW
Frequency Response	2 Hz - 20 kHz
Signal-to-Noise Ratio	105 dB
Dynamic Range	96 dB
Digital Output	Optical
Weight	3.5 kg
Channel separation	100 dB
Output Level	2.0 V (at 1 kHz, 0 dB)
Output	Analog Audio (RCA)
Total Harmonic Distortion	0.003% (1 kHz)