146 Chapter 9—Component Guide Part II
DME32—Owner’s Manual
Mono Delay
The Mono Delay component offers a no-nonsense single-channel delay.
The Mono Delay component features one input and
one output.
The Mono Delay control window consists of delay controls, input level meter, and out-
put level meter.
The IN meter displays the input signal level, while the OUT meter displays the output
signal level.
Parameter Range Description
DELAY 0.0–2730.0 ms Delay time
FB.GAIN –99 to +99%
Feedback gain (plus values for normal-phase feed-
back, minus values for reverse-phase feedback)
HI.RATIO 0.1–1.0 High-frequency feedback ratio
HPF THRU, 21.2 Hz–8.00 kHz High-pass filter cutoff frequency (THRU = filter off)
LPF 50.0 Hz–16.0 kHz, THRU Low-pass filter cutoff frequency (THRU = filter off)
To Next Page
Loading...
